UVLED paint coating has a fast curing, low temperature curing, excellent film-forming properties and safety and environmental protection and other features that will help gloss print process a lot of problems to solve, to fill many of the shortcomings of traditional glazing, its main features are as follows:
1) safety and environmental protection standards VU should belong to solvent-free varnish coating, 100% solid content, all translated into effective film-forming material that is after the light, no VOC (volatile organic compounds) emissions and help to prevent air pollution and improve the working environment, reduce the risk of fire.
2) a production efficiency of high temperature fast curing chamber, higher than the average productivity of coating method, the current general curing speed 50-150m / min, the fastest up to 300-500m / min.
3) In addition to adapt to a wide range of paper printed UVLED glazing, but also can accommodate a wide range of substrates, such as aluminum foil carrier variety of printing, gold and silver cardboard, vacuum aluminum, radium, plastics, synthetic paper, metal, wood and the like.
4) excellent film-forming properties UVLED glazing not only Sekisawa high, smooth, and after UV curing, due to the formation of a tough body mesh structure, has excellent abrasion resistance, water resistance, heat resistance, scratch resistance, chemical and solvent resistance and other properties, it is difficult to compare with other glazing paint.
5) energy saving and covers an area much less than UVLED coater solvent coating is heated drying tunnel floor space, energy consumption is also much the province, is ideal for light and on-line automated assembly line operations.
6) coating properties due to the VU glazing does not contain volatile solvents, easy to cause changes in viscosity of the coating process, the better the stability of the coating, and the amount representing the province.
7) avoids product sticking solvent-based paint coating resin used as a thermoplastic resin and more, by a larger temperature, humidity, coating thickness and drying conditions and other factors factors, the product is easy to cause varying degrees of blocking phenomenon, and light-cured coating only light conditions to meet the requirements, you do not have to worry about sticking problem occurs, you can arbitrarily stacked or post-processing operations after glazing.